Mounts: All

Fire Extinguisher Mount: NSX

You need a fire extinguisher if you're going to be racing, and it won't do you any good if it's in the trunk when your pants are on fire. This 6061 aluminum bracket mounts to the OEM front mounting bolts of either the driver or passenger seat of your NSX. Before you ask me what extinguisher to get, click HERE.

                            
                                    You now know almost everything you need to know to buy this part, and we have
                                    nothing else to say about it except what might be hiding under the tabs above.
                                    
                                    If you feel otherwise, please contact Mark with further questions.
                                    
                                You also might be interested in reading our
                                terms and conditions
                                before you order to know exactly how and why we are distributing your personal
                                information to the NSA and other company policies that may affect your daily
                                happiness quotient...

More info for the Fire Extinguisher Mount: NSX

Installed

Fire Extinguisher Mount

Fire Extinguisher Mount w/ FE bracket bolted on

Fire Extinguisher Mount

PLEASE NOTE: The red thing in the photo bolted to the Dali mount comes with your Fire extinguisher it is NOT supplied with the mount.

Ready to buy?

Now that you know everything you need to know about the Fire Extinguisher Mount: NSX why don’t you just buy one and experience the Dali Difference today!

More info for the Fire Extinguisher Mount: NSX

More info

You need a fire extinguisher if you're going to be racing, and it won't do you any good if it's in the trunk when your pants are on fire. The DALI Fire Extinguisher mount attaches to the front mounting bolts of either the driver or passenger seat of your NSX. The old one was steel and weighed 3.25 lbs. The new one (it looks the 99.9% the same so I didn't bother to change the picture) is 6061 aluminum and weighs only 1 lb. I ROCK!

PLEASE NOTE: The red thing in the photo bolted to the Dali mount comes with your Fire extinguisher it is NOT supplied with the mount.

[ don't think you need a fire extinguisher? just look here... ]

...why pay for it? That is when you can get it free with a NEW high tech Harness Bar

Ready to buy?

Now that you know everything you need to know about the Fire Extinguisher Mount: NSX why don’t you just buy one and experience the Dali Difference today!

Related Parts for Mounts: All: Fire Extinguisher Mount: NSX

	"Hardened" Motor Mounts: Core $700.00 DEFCON4 MOTOR MOUNTS - All the real racers have them and you should too. Nice dense inserts for your OEM motor mounts reduce motor "flex", quickens "response", makes your car feel like a real racer (don't let the wife get in). Set of 2 pre modified OEM mounts with our insert pressed in and ready to go. Want me to modify your old ones? (price includes a $400.00 core charge)
	"Hardened" Motor Mounts: trade in $300.00 DEFCON4 MOTOR MOUNTS - All the real racers have them and you should too. Nice dense inserts for your OEM motor mounts reduce motor "flex", quickens "response", makes your car feel like a real racer (don't let the wife get in). Trade me yours broken or not. (the rubber part, not the aluminum mount itself - that needs to be perfect). Set of 2. Price above reflects you sending me yours first. Need a set of new ones? Manual or Auto.
	Battery Mount: Odyssey 545 $60.00 These Odyssey batteries are so small and compact [they are made for Harley's] that they don't fit the NSX battery tray, so we've designed a special mount to hold in these batteries that is easily installed. Be a Badass - put a little Harley in your NSX! Stainless mounting hardware included.
	Battery Mount: Odyssey 680 v2.0 $60.00 These Odyssey batteries are so small and compact [they are made for Harley's] that they don't fit in the NSX battery tray, so we've designed a special mount to hold in these batteries that is easily installed. Install notes on the tab above. Be a Badass - put a little Harley in your NSX! Natural Aluminum finish. (polished unit shown until I take a new picture) Stainless mounting hardware included.
	Battery Mount: Odyssey 925 v2.0 $63.00 The v2.0 of the original Dali billet mount for the Odyssey 925 battery for those of you that don't want to live on the racers edge - more power, more safety margin and more weight than the 680 or the 545 options but this special even more lightweight 6061 T6 battery mount is still cool. Stainless mounting hardware included.
	Battery Mount: Optima 34 $70.00 OK OK OK so I finally made a billet mount for the Optima RED top. This one is for the 34R as that is what was in the car I used. Stop bugging me and buy one. Fits the following models: 34 34R 34/78 Stainless mounting hardware included. If you bought the one that the Optima website tells you to buy and want a mount for it click here.
	Battery Mount: Optima 35 & D35 $65.00 OK OK OK so I finally made a billet mount for the Optima RED & YELLOW top for the NSX. This one is for the 35 (red) and D35 (yellow) as that is what was in the car Brian had. Stop bugging me and buy one. According to the Optima website this is the battery that fits the NSX best, however several of their other models will. This mounting bracket fits the following models: 35 D35 Stainless mounting hardware included.
	Billet Radiator Mounting Brackets: polished $99.00 Just your not so average BILLET radiator mounting brackets polished or black powdercoated to perfection. Fits all OEM and aluminum aftermarket radiators with the locating pins in the OEM positions. Lighter than the stock steel mounts and way more shiny, (or sexy if you like your brackets in black) these billet mounts will dress your under hood playground. The polished version even compliments all those shiny cap covers you bought over at S0S. Shipped with 4 polished button head bolts.
	Billet Radiator Mounting Brackets: powdercoated $99.00 Just your not so average BILLET radiator mounting brackets polished or black powdercoated to perfection. Fits all OEM aluminum aftermarket radiators with the locating pins in the OEM positions. Lighter than the stock steel mounts and way more shiny, (or sexy if you like your brackets in black) these billet mounts will dress your under hood playground. The polished version even compliments all those shiny cap covers you bought over at S0S. Shipped with 4 polished button head bolts.
	Car Mount: NRG MINI LOWRIDER RAMP (pair) $45.00 A set of mini step up ramps to allow you to get your lowered to the MAX MAXIE MOBILE high enough off the ground to get a jack under. Works great as a race car with no handbrake "wheel chock" too. 100% aluminum, nice carry bag included.
	Car Mount: TEIN LOWRIDER RAMP (pair) $66.00 Lowered your car so far that even your $10,000.00 / 6 ounce super NASCAR race jack can't get under it anymore? You need a pair of these then. Lightweight but strong composite ramps imported by TEIN, the company that lowered your car in the first place. Allows for smooth pain free jacking, anytime, anywhere! ~2.70 inches of lift - will fit under any NSX no matter how low. These might come in a TAKATA box or no box at all.
	Fire Extinguisher Mount: ITR $45.00 You need a fire extinguisher if you're going to be racing, and it won't do you any good if it's in the pits when your pants are on fire. This 6061 aluminum bracket mounts to the OEM front mounting bolts of passenger seat of your ITR. Before you ask me what extinguisher to get, click HERE.
	Seat frame: Buddy Club: Sliders: Drivers $145.00 Nice adjustable steel seat frame for the drivers side of your NSX, side mount only. Not the lightest part in the world, but safe and secure and adjustable. And you can't have everything and a reasonable price too now can you? OK, well almost. Fits many racing shell style seats out there, but not all. 20" (508mm) width between rails.
	Seat frame: Buddy Club: Sliders: Pass $145.00 Nice adjustable steel seat frame for the pass side of your NSX, side mount only. Not the lightest part in the world, but safe and secure and adjustable. And you can't have everything and a reasonable price too now can you? OK, well almost. Fits many racing shell style seats out there, but not all. 20" (508mm) width between rails.
	Seat Mount: Dali Fixed: Cobra Sportline Wide $160.00 For mounting custom carbon fiber seats like the Cobra into your NSX. Adjustable for rake and fore and aft position, BUT THIS IS NOT A SLIDER MECHANISM. No holes to drill - uses factory seat mounting points.
	Seat Mount: Dali Fixed: MOMO Acropolis Evolution $160.00 For mounting custom carbon fiber seats like the MOMO into your NSX. Adjustable for rake and fore and aft position, BUT THIS IS NOT A SLIDER MECHANISM. No holes to drill - uses factory seat mounting points.
	Seat Mount: Dali Fixed: Recaro Pole Position $160.00 For mounting custom fiberglass seats like the RECARO into your NSX. Adjustable for rake and fore and aft position, BUT THIS IS NOT A SLIDER MECHANISM. No holes to drill - uses factory seat mounting points.
	Seat Mount: Taitec: slider system 4 race seats: Drivers side $225.00 Ordered and arrived and shipped out already - more coming. No matter what you might have read elsewhere, they actually weigh 7+Kgs each, not 7+lbs. They do look nice though and work well too. No hidden "International shipping charges to me" added on checkout - that cost is already in the posted price - U save $39.00 on each bracket.
	Seat Mount: Taitec: slider system 4 race seats: Pass side $225.00 No matter what you might have read elsewhere, they actually weigh 7+Kgs each, not 7+lbs. They do look nice though and work well too. No hidden "International shipping charges to me" added on checkout - that cost is already in the posted price - U save $39.00 on each bracket.
	Sub Strap Mounting Bar $45.00 Really cool 5th point sub belt mounting bar is designed to be bolted onto the OEM seats - works perfectly with your Dali Seat cushion! a match that was made in heaven. Lock yourself in place on the weekends and be a track star, and a commuter on Monday. Only you will know.
	Third Hand Radio Holder $15.00 The Third Hand Radio Holder is made from Delrin black plastic for that high-tech look and fits into your existing Dali Racing billet cupholder. Holds either the Uniden or Motorola/Radio Shack club radios handy so you can easily partake of the sparkling and witty repartee so often found on our club drives. A MUST!!!
	Throne Cover in CF Not Priced Yet Synonyms: can, commode, crapper, enthrone, pot, potty, stool, toilet. Antonyms: dethrone. See Also: bath, bathroom, berth, bishop's throne, cathedra, chair, flush toilet, flushless toilet, govern, invest, john, lav, lavatory, mercy seat, musnud, office, peacock-throne, place, plumbing fixture, position, post, potty chair, potty seat, privy, rule, situation, spot, toilet bowl, toilet seat, vest. BUY ONE HERE
	Valentine-1 Mount [T-Top]: box version $45.00 Mount your Valentine 1 or other inferior radar detector with the OTHER totally hip hop Dali mount for the T-top. Made to work with the box that the Invisimirror guys sell. BOX NOT INCLUDED. [requires that you also use the V1 REMOTE DISPLAY available from Valentine] (can be used in a coupe too if you insist!)
	Valentine-1 Mount [T-Top]: no box version $45.00 Mount your Valentine 1 or other inferior radar detector with the OTHER totally hip hop Dali mount for the T-top. [requires that you also use the V1 REMOTE DISPLAY available from Valentine] Not in stock at the moment due to supplier being on siesta. (can be used in a coupe too if you insist!)
	Valentine-1 Mount Kit [Coupe] Grey headliner $75.00 Mount your Valentine 1 or other inferior radar detector up tight and stealthy with this totally hip hop slidin' in the nine tray mount from that fly NSXin guy, Mark Johnson and the Dali Racing Crew. Please click the "more info" link below before you order it and then send it back because you didn't know how it mounts until you got it.
	Valentine-1 Mount Kit [Coupe] Ivory headliner $75.00 Mount your Valentine 1 or other inferior radar detector up tight and stealthy with this totally hip hop slidin' in the nine tray mount from that fly NSXin guy, Mark Johnson and the Dali Racing Crew. Please click the "more info" link below before you order it and then send it back because you didn't know how it mounts until you got it.
	Valentine-1 Mount Kit [Coupe] Tan headliner $75.00 Mount your Valentine 1 or other inferior radar detector up tight and stealthy with this totally hip hop slidin' in the nine tray mount from that fly NSXin guy, Mark Johnson and the Dali Racing Crew. Please click the "more info" link below before you order it and then send it back because you didn't know how it mounts until you got it.
	Video Camera Mount w/ Black Chrome Finished base $109.00 Mount a camcorder to your harness bar and catch all the racing action now so you can prove to your petulant grandchildren that yes, grandpa was really cool at one time.
	Video Camera Mount w/ Chrome Finish base $104.00 Mount a camcorder to your harness bar and catch all the racing action now so you can prove to your petulant grandchildren that yes, grandpa was really cool at one time.
	Video Camera Mount w/ Machined Finish base $99.00 Mount a camcorder to your harness bar and catch all the racing action now so you can prove to your petulant grandchildren that yes, grandpa was really cool at one time.
	Video Camera Mount w/ Polished Finish base $104.00 Mount a camcorder to your harness bar and catch all the racing action now so you can prove to your petulant grandchildren that yes, grandpa was really cool at one time.