Mounts: All
Valentine-1 Mount Kit [Coupe] Ivory headliner

Part Info
Coupe
Coupe Install
T-top
T-top install
Related Parts
Library

Mount your Valentine 1 or other inferior radar detector up tight and stealthy with this totally hip hop slidin' in the nine tray mount from that fly NSXin guy, Mark Johnson and the Dali Racing Crew. Please click the "more info" link below before you order it and then send it back because you didn't know how it mounts until you got it.

                            
                                    Think you know everything there is to know about this part and are ready to order?
                                    Unless you are me, or a Prime blowhard you may not....so we have thoughtfully added more important information about this and related parts on the tabs above - you might want to check them out before clicking on the "add to order" button to buy this part. If that is too much trouble and you just want me to tell you what to do you might use the link below:

                                CLICK HERE TO CONTACT ONE OF OUR CARING SERVICE REPS FOR SOME HAND HOLDING ABOUT THIS PART!!!
                                    
                                You also might be interested in reading our terms and conditions before you order to know exactly how and why we are distributing your personal information to the NSA, Dick Cheney's CIA Hit Squad and Karl Rove's RNC Donor Lists....

More info for the Valentine-1 Mount Kit [Coupe] Ivory headliner

Coupe

Mount your Valentine 1 with this totally hip hop slidin' in the nine tray mount in yo' coupe from that fly NSXin guy, Mark Johnson and the Dali Racing Crew.

To get the most use out of your Valentine 1 Mount Kit you should purchase a Valentine1.

V1,Valentine1, Valentine, 1, Valentine 1, mount kit, mount template, v1 mounting template, v1, Valentine-1, V1, mounting, mount, mounting kit, mount kit, kit, radar, radar detector, detector, radar detector mount, Acura NSX, NSX, mounting template, v1 mounting template, valentine 1 mounting template, valentine 1

Ready to buy?

Now that you know everything you need to know about the Valentine-1 Mount Kit [Coupe] Ivory headliner why don’t you just buy one and experience the Dali Difference today!

More info for the Valentine-1 Mount Kit [Coupe] Ivory headliner

Coupe Install

Step 1

Remove your center visor. Save the OEM screws.

Step 2

Use the template you downloaded to mark the holes for the Valentine mounting block.

Step 3

Install the two billet visor end pieces using the OEM screws you saved from step 1.

Step 4

Install mounting block with either of the supplied velcro strips or self tapping screws.

Assuming that you have already run the wires, you are done!

Congratulations!

Ready to buy?

Now that you know everything you need to know about the Valentine-1 Mount Kit [Coupe] Ivory headliner why don’t you just buy one and experience the Dali Difference today!

More info for the Valentine-1 Mount Kit [Coupe] Ivory headliner

T-top

Mount your Valentine 1 with this totally hip hop slidin' in the nine tray mount for the T-top from that fly NSXin guy, Mark Johnson and the Dali Racing Crew.

To get the most use out of your Valentine 1 Mount Kit you should purchase a Valentine1.

Ready to buy?

Now that you know everything you need to know about the Valentine-1 Mount Kit [Coupe] Ivory headliner why don’t you just buy one and experience the Dali Difference today!

More info for the Valentine-1 Mount Kit [Coupe] Ivory headliner

T-top install

Then follow the yellow brick road below....

Wanna end up here?

Step 1

Remove horizontal upholstery cover. Then emove bolts circled in red above with a 10mm socket.

Step 2

Attach the V1 mount for fitting purposes using the existing OEM bolts.

Step 3

Trim rubber firewall insulation around mount on both legs of the mount as demonstrated in the two pictures above and below.

Step 4

Remove Mount and peel off cut rubber insulation.

Step 5

Rebolt Mount to firewall using existing OEM bolts.
Now comes the fun part. You've got to run the remote display signal wire to the front.

Here are some options from nsxprime.com on how to do it...

Final View:
What the fuzz sees after he pulls you over anyway!

Ready to buy?

Now that you know everything you need to know about the Valentine-1 Mount Kit [Coupe] Ivory headliner why don’t you just buy one and experience the Dali Difference today!

Related Parts for Mounts: All: Valentine-1 Mount Kit [Coupe] Ivory headliner

	"Hardened" Motor Mounts: Core $700.00 DEFCON4 MOTOR MOUNTS - All the real racers have them and you should too. Nice dense inserts for your OEM motor mounts reduce motor "flex", quickens "response", makes your car feel like a real racer (don't let the wife get in). Set of 2 pre modified OEM mounts with our insert pressed in and ready to go. Want me to modify your old ones? (price includes a $400.00 core charge)
	"Hardened" Motor Mounts: trade in $300.00 DEFCON4 MOTOR MOUNTS - All the real racers have them and you should too. Nice dense inserts for your OEM motor mounts reduce motor "flex", quickens "response", makes your car feel like a real racer (don't let the wife get in). Trade me yours broken or not. (the rubber part, not the aluminum mount itself - that needs to be perfect). Set of 2. Price above reflects you sending me yours first. Need a set of new ones? Manual or Auto.
	Battery Mount: Odyssey 545 $60.00 These Odyssey batteries are so small and compact [they are made for Harley's] that they don't fit the NSX battery tray, so we've designed a special mount to hold in these batteries that is easily installed. Ok, maybe it was EZ for me and Andy and it will take you 4 days - who am I to judge? Be a Badass - put a little Harley in your NSX! Stainless mounting hardware included. Battery NOT included.
	Battery Mount: Odyssey 680 v2.0 $60.00 These Odyssey batteries are so small and compact [they are made for Harley's] that they don't fit in the NSX battery tray, so we've designed a special mount to hold in these itty-bitty batteries that is easily installed. Install notes on the tab above. Be a Badass - put a little Harley in your NSX! Natural Aluminum finish. Stainless mounting hardware included. Or would rather have some shine with that? Of course you only get one, but 2 were sitting there, hence the picture.
	Battery Mount: Odyssey 925 v2.0 $63.00 The v2.0 of the original Dali billet mount for the Odyssey 925 battery for those of you that don't want to live on the racers edge - more power, more safety margin and more weight than the 680 or the 545 options but this special even more lightweight 6061 T6 battery mount is still cool. Stainless mounting hardware included.
	Battery Mount: Optima 34 $70.00 OK OK OK so I finally made a billet mount for the Optima RED top. This one is for the 34R as that is what was in the car I used. Stop bugging me and buy one. Fits the following models: 34 34R 34/78 Stainless mounting hardware included. If you bought the one that the Optima website tells you to buy and want a mount for it click here.
	Battery Mount: Optima 35 & D35 $65.00 OK OK OK so I finally made a billet mount for the Optima RED & YELLOW top for the NSX. This one is for the 35 (red) and D35 (yellow) as that is what was in the car Brian had. Stop bugging me and buy one. According to the Optima website this is the battery that fits the NSX best, however several of their other models will. This mounting bracket fits the following models: 35 D35 Stainless mounting hardware included.
	Billet Radiator Mounting Brackets: polished $99.00 Just your not so average BILLET radiator mounting brackets polished or black powdercoated to perfection. Fits all OEM and aluminum aftermarket radiators with the locating pins in the OEM positions. Lighter than the stock steel mounts and way more shiny, (or sexy if you like your brackets in black) these billet mounts will dress your under hood playground. The polished version even compliments all those shiny cap covers you bought over at S0S. Shipped with 4 polished button head bolts.
	Billet Radiator Mounting Brackets: powdercoated $99.00 Just your not so average BILLET radiator mounting brackets polished or black powdercoated to perfection. Fits all OEM aluminum aftermarket radiators with the locating pins in the OEM positions. Lighter than the stock steel mounts and way more shiny, (or sexy if you like your brackets in black) these billet mounts will dress your under hood playground. The polished version even compliments all those shiny cap covers you bought over at S0S. Shipped with 4 polished button head bolts.
	Car Mount: NRG MINI LOWRIDER RAMP (pair) $45.00 A set of mini step up ramps to allow you to get your lowered to the MAX MAXIE MOBILE high enough off the ground to get a jack under. Works great as a race car with no handbrake "wheel chock" too. 100% aluminum, nice carry bag included.
	Car Mount: TEIN LOWRIDER RAMP (pair) $66.00 Lowered your car so far that even your $10,000.00 / 6 ounce super NASCAR race jack can't get under it anymore? You need a pair of these then. Lightweight but strong composite ramps imported by TEIN, the company that lowered your car in the first place. Allows for smooth pain free jacking, anytime, anywhere! ~2.70 inches of lift - will fit under any NSX no matter how low. These might come in a TAKATA box or no box at all.
	Fire Extinguisher Mount: ITR $45.00 You need a fire extinguisher if you're going to be racing, and it won't do you any good if it's in the pits when your pants are on fire. This 6061 aluminum bracket mounts to the OEM front mounting bolts of passenger seat of your ITR. Before you ask me what extinguisher to get, click HERE.
	Fire Extinguisher Mount: NSX $45.00 You need a fire extinguisher if you're going to be racing, and it won't do you any good if it's in the trunk when your pants are on fire. This 6061 aluminum bracket mounts to the OEM front mounting bolts of either the driver or passenger seat of your NSX. Before you ask me what extinguisher to get, click HERE.
	Foglight mounting kit: pair $30.00 Set of made in the Dali Dungeon copies of the OEM JDM Fog light OEM JDM fog light mounting brackets. (That's SEOspeak for OEM JDM fog light brackets) Allows you to cleanly install your used JDM foglights you bought off Prime and/or maybe the Canadian running lights (never seen one in real life) or potentially some aftermarket stuff. Bolts to the OEM location using your OEM bolts. Nice welded on fixing nut (metric of course) to help steady things. Made from steel and then sprayed with black Rustolium. If you don't know where these go you might not want to buy a set.
	Seat frame: Buddy Club: Sliders: Drivers $155.00 Nice adjustable steel seat frame for the drivers side of your NSX, side mount only. Not the lightest part in the world, but safe and secure and adjustable. And you can't have everything and a reasonable price too now can you? OK, well almost. Fits many racing shell style seats out there, but not all. 20" (508mm) width between rails.
	Seat frame: Buddy Club: Sliders: Pass $155.00 Nice adjustable steel seat frame for the pass side of your NSX, side mount only. Not the lightest part in the world, but safe and secure and adjustable. And you can't have everything and a reasonable price too now can you? OK, well almost. Fits many racing shell style seats out there, but not all. 20" (508mm) width between rails.
	Seat Frame: Dali Fixed: Cobra Sportline Wide $160.00 For mounting custom carbon fiber seats like the Cobra into your NSX. Adjustable for rake and fore and aft position, BUT THIS IS NOT A SLIDER MECHANISM. No holes to drill - uses factory seat mounting points.
	Seat Frame: Dali Fixed: MOMO Acropolis Evolution $160.00 For mounting custom carbon fiber seats like the MOMO into your NSX. Adjustable for rake and fore and aft position, BUT THIS IS NOT A SLIDER MECHANISM. No holes to drill - uses factory seat mounting points.
	Seat Frame: Dali Fixed: Recaro Pole Position $160.00 For mounting custom fiberglass seats like the RECARO into your NSX. Adjustable for rake and fore and aft position, BUT THIS IS NOT A SLIDER MECHANISM. No holes to drill - uses factory seat mounting points.
	Seat Mount: Taitec: slider system 4 race seats: Drivers side $225.00 Ordered and arrived and shipped out already - more coming. No matter what you might have read elsewhere, they actually weigh 7+Kgs each, not 7+lbs. They do look nice though and work well too. No hidden "International shipping charges to me" added on checkout - that cost is already in the posted price - U save $39.00 on each bracket.
	Seat Mount: Taitec: slider system 4 race seats: Pass side $225.00 No matter what you might have read elsewhere, they actually weigh 7+Kgs each, not 7+lbs. They do look nice though and work well too. No hidden "International shipping charges to me" added on checkout - that cost is already in the posted price - U save $39.00 on each bracket.
	Sub Strap Mounting Bar for harness bars $45.00 Really cool 5th point sub belt mounting bar is designed to be bolted onto the OEM seats - works perfectly with your Dali Seat cushion! a match that was made in heaven. Lock yourself in place on the weekends and be a track star, and a commuter on Monday. Only you will know.
	Third Hand Radio Holder $15.00 The Third Hand Radio Holder is made from Delrin black plastic for that high-tech look and fits into your existing Dali Racing billet cupholder. Holds either the Uniden or Motorola/Radio Shack club radios handy so you can easily partake of the sparkling and witty repartee so often found on our club drives. A MUST!!!
	Throne Cover in CF Not Priced Yet Synonyms: can, commode, crapper, enthrone, pot, potty, stool, toilet. Antonyms: dethrone. See Also: bath, bathroom, berth, bishop's throne, cathedra, chair, flush toilet, flushless toilet, govern, invest, john, lav, lavatory, mercy seat, musnud, office, peacock-throne, place, plumbing fixture, position, post, potty chair, potty seat, privy, rule, situation, spot, toilet bowl, toilet seat, vest. BUY ONE HERE
	Valentine-1 Mount [T-Top]: box version $45.00 Mount your Valentine 1 or other inferior radar detector with the OTHER totally hip hop Dali mount for the T-top. Made to work with the box that the Invisimirror guys sell. BOX NOT INCLUDED. [requires that you also use the V1 REMOTE DISPLAY available from Valentine] (can be used in a coupe too if you insist!)
	Valentine-1 Mount [T-Top]: no box version $45.00 Mount your Valentine 1 or other inferior radar detector with the OTHER totally hip hop Dali mount for the T-top. [requires that you also use the V1 REMOTE DISPLAY available from Valentine] Not in stock at the moment due to supplier being on siesta. (can be used in a coupe too if you insist!)
	Valentine-1 Mount Kit [Coupe] Grey headliner $75.00 Mount your Valentine 1 or other inferior radar detector up tight and stealthy with this totally hip hop slidin' in the nine tray mount from that fly NSXin guy, Mark Johnson and the Dali Racing Crew. Please click the "more info" link below before you order it and then send it back because you didn't know how it mounts until you got it.
	Valentine-1 Mount Kit [Coupe] Tan headliner $75.00 Mount your Valentine 1 or other inferior radar detector up tight and stealthy with this totally hip hop slidin' in the nine tray mount from that fly NSXin guy, Mark Johnson and the Dali Racing Crew. Please click the "more info" link below before you order it and then send it back because you didn't know how it mounts until you got it.
	Video Camera Mount w/ Black Chrome Finished base $109.00 Mount a camcorder to your harness bar and catch all the racing action now so you can prove to your petulant grandchildren that yes, grandpa was really cool at one time.
	Video Camera Mount w/ Chrome Finish base $104.00 Mount a camcorder to your harness bar and catch all the racing action now so you can prove to your petulant grandchildren that yes, grandpa was really cool at one time.
	Video Camera Mount w/ Machined Finish base $99.00 Mount a camcorder to your harness bar and catch all the racing action now so you can prove to your petulant grandchildren that yes, grandpa was really cool at one time.
	Video Camera Mount w/ Polished Finish base $104.00 Mount a camcorder to your harness bar and catch all the racing action now so you can prove to your petulant grandchildren that yes, grandpa was really cool at one time.